Even though both e71t gs and e71t 11 are quite similar models, they’re not the same in all aspects. As a matter of fact, they’re different in size and weight. As if that’s not enough, they have different applications altogether.
So, when you’re trying to choose between them, things can get a bit confusing.
But, we won’t leave you hanging on the matter. So, we’ve compiled the head-head comparison between- e71t gs vs e71t 11.
And, we haven’t stopped right there. We’ve taken the stride forward and discussed the pros/cons of these two welding wires.
Sounds exciting? Let’s begin now-
|Common Grounds||E71t gs||E71t 11|
|Weight||4 pounds||10 pounds|
|Application||Single Applications||Multiple Applications|
Similarity-Based on Different Factors
From the perspective of similarity, both of these wires are quite the same. Starting off, they’re both self-shielded wires. And, they’re flux-cored wires as well. Both of these two wires have an exterior sheath on them.
Here, the exterior sheath is filled with flux. And, what is this compound made of? Well, they’re made of a mixture of alloy and deoxidizer. This mixture helps the weld from any bit of contaminants.
Other than that, both of these two wires don’t actually need any bit of gas supply. Normally, wires that are gas shields require a gas supply. But, that won’t be the case here.
As the wires don’t require gas supply, you can use them on outdoor welding as well. When it comes to portability, both these gases can be moved around easily. This is because both of them generate shielding gas. So, portability won’t be an issue.
Comparison Based on Different Factors
When it comes to differences, there are quite a few between these welding wires. For starters, there’s a difference in the application process.
Here, the E71t gs can be used to weld steel that ranges from 3/16”-22 gauge. This type of welding wire is normally used for single welding purposes. And, they can be even used on aluminum surfaces and galvanized materials.
Hence, these wires are used for single-pass welding all the time.
Whereas, the E71t 11 can be used for metal erections and for the fabrication of mild steels. Here, the weld plates range not more than 3/4 ”.This wire helps at producing smoother weld deposits and can provide greater penetration.
When compared to the single-pass welding of the e71t gs, e71t 11 can be used for multi-pass welding.
As we’re done breaking both of them, let’s take a look at their overview and pros/cons right below-
Let’s start off by introducing this type of welding wire. Firstly, they are great at working on mild steel. This is because you’ll get options of using these wires with MIG welder and Flux core.
Now, if we’re focusing on the design then you’ll observe that they have gasless operations. As they’re gasless, you won’t be requiring any protection gas in preventing air or dirt from entering the welding.
And, by not using any protection gas in the wires, you’ll be able to save up on costs. Another benefit of being gasless is that you won’t have to worry about the portability of the wire.
Having a gasless operation, the need of carrying a gas tank nullifies automatically. So, you won’t have to worry about portability.
Moving on, let’s focus on the cleanup and bead appearance of the wire. With an enhanced appearance and lower cleanup, this wire is perfect for any kind of outdoor applications.
As the wire has an impressive bead appearance and lower cleanup, you won’t have to worry much about using them outdoors. In fact, you won’t even need to set up any types of windshields with the wire.
On the other hand, the wire does a great job at fusing the galvanized steel. Here, the flux-cored wires eat up zinc. As a result, it’ll fuse with galvanized steel easily. Plus, it even ensures that it produces fewer fumes when compared to other wires in the market.
Apart from this, the wire is wrapped in aluminum foil. And, where does that benefit us? Well, the foil helps prevent any kind of external hazard to the wire.
When it comes to welding applications, the wire is perfect at working with steel. As a matter of fact, you can even use these wires on thicker steel. This is because of the impressive penetration ability of the wire.
Lastly, the wire comes at an affordable price range and you’ll enjoy all these key features on a budget. Even though it can burn at times, welding straightly will minimize the likelihood of it.
- Produces lesser fumes and splatter
- Can be used on thicker steels
- Fuses easily with galvanized steels
- Prevents external hazards
- Doesn’t require much clean-up after welding
- Comes at an affordable price range
- Doesn’t maintain consistency all the time
Now, it’s time to discuss the e71t 11. Even though it’s quite similar to the e71t gs, there are some differences. So, let’s just get right into the key features of this wire.
Firstly, the e71t 11, works best with thicker materials. To be precise, it’ll be able to work on 3/4” thicker materials. So, you can even use these materials at working over carbon steels.
However, you shouldn’t get overboard with the usage of this wire on thicker metals. As there’s a range, you shouldn’t pass the limit. Otherwise, they won’t work properly. Hence, it’s advised to not steel plates that are extremely thick in nature.
Similar to the previous model, this doesn’t require a gas tank as well. So, you won’t have to worry about the portability of this wire.
As the model works well with both multiple and single passes of welding, you can use them at fabricating machinery parts. Moreover, they can be used on structural frameworks too. But, make sure these frameworks are light enough.
On the other hand, ventilation is quite some issue in this model. This is because it lacks fluoride compounds. As a result, you’ll need to be careful when working on galvanized steel, unlike the previous model.
Another caveat when working with this wire is the zinc oxide formation. Here, the wire can formulate zinc oxide which may lead to respiratory problems. So, it’s better to wear protective gear when working around this wire. And, if you want to work indoors, ensure proper ventilation at all times.
Now, let’s focus on the cleanup of this wire. With an easy cleanup, using this wire won’t be a problem. But, ensure a power source with the wire. Because a power source will ensure the required voltage for improved performance.
Lastly, you’ll need to use this wire straightly as well. If you don’t have the polarity correctly then you’ll end up with a higher spatter all around.
- Has an easy cleanup
- Removes slag easily
- Produces lesser spatter everywhere
- Comes with a stable arc
- The wire is simple to use
- Produces zinc oxide that can make it hard to breathe
When comparing between the two, we’ve crowned the e71t 11 as the winner. It has a few benefits over the other one. So, your purpose will be fulfilled quite easily.
Q. Which one is the best welding wire?
Ans. The best welding wire is the Hobart Fabshield E71T-11.
Q. What is the meaning of E71t gs?
Ans. E71t gs is a welding wire. However, it’s used for single pass-through applications only.
Q. What’s the meaning of E71t 11?
Ans. E71t 11 is a welding wire as well. And, it can be used for multiple pass welding.
We’re done, folks. This marks the end of the comparison- e71t gs vs e71t 11. If you’ve followed thoroughly then you’ll know which one is the winner.
In the end, both of these two wires are excellent and have a lot of benefits. But, when comparing between the two, the e71t 11 takes the slight lead.
That said, you can still rely on both models in order to get the work done. Good Luck!