best welding chipping hammer

Best Welding Chipping Hammer: Reviews & Guide for 2021

Almost all kinds of welding chores come with spatters and slags.

And no matter how good of a welder you are, you might have a hard time dealing with those residues anyway. And that might lead you to this page in search of the best welding chipping hammer for your job. 

Sounds positive? Well, we’ve got good news for you, friend.  

Below are the reviews of the 7 best welding chipping hammers on the market, followed by a handy buyer’s guide as well. Take a few minutes to go through, and we promise you won’t regret it. 

Let’s start with a quick comparison- 

Comparison Table

Product What’s In the Set? Material(Hammer)
VASTOOLS Welding Chipping Hammer Hammer + Wire Brush High carbon steel
Lincoln Electric Industrial Chipping Hammer Hammer Only High strength steel
Estwing BIG BLUE Welding/Chipping Hammer Hammer Only American Steel
Deke Home Welding Chipping Hammer Hammer + Wire Brush High carbon steel
Pit Bull CHIH058 Chipping Hammer Hammer Only Steel
Junrbx Welding hammer Hammer Only 45 Steel
Vaper 41225 Chipping Hammer Hammer Only Steel

VASTOOLS Welding Chipping Hammer

VASTOOLS Welding Chipping Hammer

Specs

  • Brand: VasTools 
  • Handle Type: Spring 
  • Length of the Hammer: 10-½” 
  • Length of the Brush: 10” 
  • Hammer Material: High Carbon Steel 
  • Wire Material: Steel 

Product Overview

With a bit of surprise, the first pick on the list is not only just a chipping hammer but also, it’s a combo of a hammer and wired welding brush. Why on earth so? You might ask. 

Before answering, let’s have a round of applause for VASTOOLS Welding Chipping Hammer- the #1 pick of the day. 

About such combos, the first impression that we have is- brands often compromise qualities to keep the products under the budget. But thankfully, Vastools is one exception that has met both hands with this VASTOOLS Welding Chipping Hammer+brush combo. 

Let’s take a closer look at the hammer first- 

The 10-½” long hammer comes with a spring handle, and it’s made of one-piece high carbon steel. If you don’t know, those kinds of steel are the best-known ones for offering strength for such impact tools. 

While the hammer has a tempered, flat end on one side, and a pointy one on the other. Both will come to use if you think about different types of welding slags that come across your way. 

Moving from the hammer to the brush, we get a 10” long handle with closely placed bristle wires on top of it. For quickly sweeping away the small and clicky welding slags, you can’t have anything better than this. 

The brush wires are made with steel, hence, you don’t have to worry about the durability and impact resistance of them. Just be gentle while using the brush on rough, unfinished welding surfaces. 

Pros

  • A complete hammer-brush combo for all kinds of welding finishes. 
  • Made of durable high-carbon steel material. 
  • 10-½” long, easy to operate hammer. 
  • Pointy and flat- both sides are tempered. 

Cons

  • The hammer isn’t a one-piece construction. 

Lincoln Electric Industrial Chipping Hammer

Lincoln Electric Industrial Chipping Hammer

Specs

  • Brand: Lincoln Electric
  • Handle Type: Spiral with the axis. 
  • Material: High-strength steel
  • Protective Layer: Yes
  • Weight: 1.25 pounds
  • Wire Brush: No

Product Overview

At #2, we have just the spring handle hammer from the inventory of Lincoln Electric, dropping its companion wire brush off. Because, this time, we want you to focus on the hammer only, and check its compatibility with your welding chores.

Before anything else, we want to address the heat-strengthened steel construction of the hammer. It will endure months and months of heavy impacts and will stay undented. Also, it boosts the hardness of the hammer itself.

Moving down to the handle, we see a spring-style, spiral handle. On the axis of the handle, there is a metal part that stands it out from other spiral handles. As a combined effect, you will see more absorption of impacts of the body, and less impact of that on your hand.

Hence, it’d prevent any kind of hand-fatigue while hammering with it.

To make sure that the hammering goes as you wish, the two heads of the hammer come in flat and conical shapes. This will let you operate even in a tight space.

Lastly, we’d like to recall the anti-rust coat across the whole hammer body that makes it resistant to rust buildup.

Almost forgot, but the model is super budget-friendly. Especially, if you don’t need to spend after an entire hammer-brush combo.

Pros

  • Made of high-strength steel. 
  • Highly shock-absorbing design of the handle. 
  • Protective coat against rust buildup. 
  • Dedicated for use in industry-grade welding. 
  • Pretty satisfying price point. 

Cons

  • Isn’t made for amateur-grade welding.

Estwing BIG BLUE Welding/Chipping Hammer

Estwing BIG BLUE Welding Chipping Hammer

Specs

  • Brand: Estwing
  • Hammer Handle Type: Plain Grip
  • Material: American Steel
  • Weight: 13.8 ounces
  • Shock Reduction: 70%

Product Overview

No matter if you’re a machinist, welder, blacksmith, or literally anybody who needs to deal with welding, you’d love this hammer from Estwing. It’s called the ‘big blue’ because of the structure and color of the hammer. But if you are curious, there is a lot more to learn about it.

Firstly, it’s the one-piece structure that makes the difference for striking tools like this. From a single piece of American Steel meta, it’s forged, tempered, and then polished to make it what it is.

Hence, it won’t break down or even temper at any given impact forces. Good for chipping out those welding errors you’d have.

Getting back to the handle of this hammer, we find a patented design of one such grip that reduces the shocks by 70%. Hence, it’d offer you sheer accuracy while chipping out the welding cracks and extras, even with a sweaty palm.

On top of that, the number of variations of the diameter of the handle within different places is actually a reason. This gives the hammer a geometrical advantage while it comes to removing the slags for any welding job.

The one that we’ve picked up is a one-piece pack. You can also have 2, 3, or 4 packs of the same model.

Pros

  • Made in one-piece, forged from metal. 
  • Heat-treated for enhanced durability. 
  • 70% impact force resistance. 
  • Large, easy to handle grip. 
  • Comes in 4 packages. 

Cons

  • The price is a bit higher for such one-piece hammers.

Deke Home Welding Chipping Hammer

Welding Chipping Hammer with Coil Spring Handle

Specs

  • Brand: Deke Home
  • Hammer Handle Type: Spring Handle
  • Number of Wire Rows on Brush: 4
  • Brush Length: 112” 
  • Hammer Weight: 1.12 lbs

Product Overview

This is the 2nd combo pack of a welding chipping hammer and a wire brush in today’s list. If you’ve been into welding for a while, you know the significance that such combo packs carry in.

However, this set from Deke Home contains a metal chipping hammer with a coil spring handle. And the wire brush is of 4 rows, within each you’ll have bristled, strong wires to take care of your welding mess.

By now, you already know that the spring handle will provide you a superior shock-absorbing capability, while the pointy hammer here will be taking care of those slags.

To make things more practical, the other end of the hammer is kept flat. And this will help you to get into tight, narrow joints and spots where welding had taken place.

Moving forward to the brush, we get a shoe wood handle brush, with 4 rows of wire on top of it. It offers 118” of brush length, which is easy to operate. And the handle is a bit curved to let you hold it even firmer.

One of the biggest selling points of this combo is the price point. Compared to other such pairs, it comes with a pretty surprisingly low cost. Thanks, Deke Home.

Pros

  • A budget-friendly welding brush and hammer combo. 
  • Spring handle on the hammer, easy to handle. 
  • Comes with both flat and pointy hammer ends. 
  • Weighs less, doesn’t reach stress. 
  • One of the best price points offered in the market. 

Cons

  • The brush handle is somewhat less impact-prone. 

Pit Bull CHIH058 Chipping Hammer

Pit Bull CHIH058 Chipping Hammer

Specs

  • Brand: Pit Bull
  • Handle Type: Helical Spring
  • Wire Brush: No
  • Tails: Flattened and Pointy

Product Overview

This is the second pick of hammer-only products that come with spiral, spring-style handles. But with the previous one, there are a few significant differences that we’ll talk about.

First of all. It’s the super-pointy end of the hammer that matters while it comes to dealing with unusually shaped slags of welding jobs. Even cone-shaped ends are not the right choice for dealing with those.

Apart from that, the flattened end serves right, and the construction is pretty solid. The one that we’ve picked, for now, is the limited edition one. There’s another with a slight drop in the price. 

In case you want it to store or hang while not using, there is a hanging hook with it.

Pros

  • Simple and yet tonight built 
  • Comes with a pretty sharp and pointy end 
  • Spiral spring style handle 
  • Small, compact design for easy handling 

Cons

  • The spiral part could have been a bit longer 

Junrbx Welding hammer

Junrbx Chipping Welding Hammer

Specs

  • Brand: JunRbx
  • Handle Type: Spiral
  • Wire Brush: No
  • Weight: 10.4 ounces

Product Overview

Alright, we have Junrbx Welding hammer on the podium at this moment. And the #1 selling point of this model is the flat end of it. Sounds a bit weird? Well, let’s explain. 

Usually, the length of the beveled/flat end of the chipping hammer comes with the same diameter as the pointy one. But when you need to deal with a bit wider slags of welding, that might reach you less time-effectiveness. 

Hence, the design of this model is kept a bit larger in size compared to the other end of the hammer. This will make your hammering work faster. 

Other than that, it has a spring handle along with a comfortable grip. It reaches fewer impacts of strikes to your hand, and less hand fatigue as well. 

And the whole body is made of 45 steel, which is a well-known steel type as long durability is concerned. 

Pros

  • Easy buffering while hammering slags with it. 
  • Wider flat end and sharper end at the other. 
  • Made of durable 45 steel. 
  • Shockproof design of the body. 
  • One of the most budget-friendly deals. 

Cons

  • The tip to tip length isn’t suitable for large slags. 

Vaper 41225 Chipping Hammer

Vaper 41225 Chipping Hammer

Specs

  • Brand: Vaper
  • Handle Type: Spiral
  • Weight: 1.1 pounds

Product Overview

To keep it as a surprise, we’ve bought up the most budget-friendly product of today’s list at the very last. It’s called the Vaper 41225 Chipping Hammer, and just because it’s an affordable model, I don’t understand its built quality and functions. 

Let’s have a look at what’s inside- 

First of all, both the tip to tip length and the length of the handle aren’t not that large. That makes this hammer good for use on short, compact welding objects. But for if you want good and impactful strikes, this might not be your cup of tea. 

The spiral part of the handle comes with thicker helical stripes. So, it’d be more durable. But it might not provide as good shock absorption as others. 

Overall, the flat and pointy heads might get in use for dealing with surface-level slags and chips. But beware of those stubborn, deeply rooted ones. Because this might not be able to handle it well. 

Pros

  • Small and compact footprint. 
  • More durable spiral handle of the hammer. 
  • Both pointy and flat-headed ends. 
  • Most budget-friendly pick on the list. 

Cons

  • Too short for stubborn slags of welding jobs. 

Buyer’s Guide

Once you’ve gone through all 7 of our best welding chipping hammers, we can guess that you have picked up a few for your shortlist. But to make the purchase decision even more precise, you might like to go through the buying guide below-

The handling Comfort

No matter whatever kind of welding slag you are dealing with, you might want the hammering to be hassle-free, and without causing any fatigue to your hands. 

For that, make sure that the handle comes with a comfy handle with ample grip. And look out for the perfect length of the handle as well. 

The Handle Type

Another thing to look into the handle is the type of structure it comes with. Usually, it’s a trend to go with spiral, helix-style handles that offer more grip. If you want, you can also go with the straight ones that look like usual hammers. 

The Structure

In terms of works that a chipping hammer has to do, it has to be super durable and impact-resisting. On that note, we’d prefer them to be one-piece. Even, on this list, we have one. 

But not always, you’d get one piece constructions. In those cases, look for a solid joint between the head and the handle. 

FAQ

Q. How does the welder use a welding chipping hammer?

Ans. A welder usually holds the hammer end(either the flat one or the pointy one) against the welding slags and provides impact forces. 

Q. How To Choose The Best Welding Chipping Hammer? 

Ans. Look for The handling Comfort, the handle type, and the structural strength as per the aforementioned buyers guide for the best welding chipping hammer. 

Q. What type of welding process produces spatter and slags? 

Ans. Almost all kinds of arc welding produce spatter and slags. 

Bottom Line

Alright, it’s the end of today’s story. Hopefully, you’ve found the best welding chipping hammer for your purpose. If needed, you can also look for a hammer+brush combo for better convenience. 

Last update on 2021-02-26 / Affiliate links / Images from Amazon Product Advertising API

Scroll to Top