Best 110v MIG Welder

This site contains affiliate links to products. We may receive a commission for purchases made through these links.

110V MIG welders are excellent for light to medium-duty welding tasks. They easily cut through ⅛ inch sheets of metal and can handle up to ¼ inches of mild steel. These welders are also pretty easy to use, making them a good choice for beginners. However, these units are harder to find, especially ones that provide consistent quality. Fortunately, we did the research for you and compiled five of the best 110V MIG welders that provide clean cuts and high-quality welds. 

Comparison Chart

Weldpro Multi Process Welder
51VyH7fXphL. SL500
Reboot MIG Welder 210A 110/220V
YESWELDER Digital MIG-205DS MIG Welder
51SEWe1cO3L. SL500
HITBOX 3 In 1 SYN Mig Welder
51IeUv8zrrL. SL500
SIMDER MIG Welder Flux Core

110v MIG Welder Reviews

1. Weldpro Multi Process Welder

This welder is capable of TIG, MIG, stick arc capability, and flux core. Weldpro is one of North America’s best manufacturers of welding products, and this is a technologically advanced piece of equipment. The company is known for manufacturing and offering plasma cutters, TIG, and MIG welders, among other accessories, that stand out from their competitors. In addition to providing quality products, they sell them at reasonable prices. Most of what they produce is courtesy of the best-advanced engineering and latest technology possible. 

Review

This welder comes in a lightweight design weighing in at 30 pounds. This makes it easy to load it in the back of your truck and carry it with you wherever the job takes you. The Weldpro MIG200GDsv scores points for durability courtesy of the aluminum wire drive mechanism that mounts both 4″ and 8″ wire spools. The unit comes with a TIG and MIG torch and a MIG gas regulator. 

The Weldpro MIG200GDsv is a dual-voltage machine that you can plug into a 110-120 volt or 220–240-volt source. When it runs on 110v MIG, it allows you to weld from 25 to 140 amps of output. That can get you from a 24-gauge metal sheet to around 1/8″ steel.

If you go with the 240-volt power, this machine can get you to approximately 3/8″ thick steel. To run TIG, you will need a TIG gas regulator, which you must purchase separately. Unfortunately, you cannot use a foot pedal with the Weldpro MIG200GDsv to control the heat. However, there’s an enabled 2T/4T trigger lock for long TIG weld runs.

One of the highlights of this machine is its versatility. It can weld stainless steel, copper, magnesium, and steel right from the box. It can even work on brass and bronze. Another handy feature is the Voltage Reduction Device (VRD), a safety feature that reduces the voltage when the unit is on but not in use. Should the electrode and ground clamp short accidentally when you are not welding, you will not be injured or killed from the electric shock. 

Pros

  • Light and portable
  • Voltage Reduction Device (VRD) is convenient to have
  • 200 amps of power output
  • Variety in terms of the metals it can weld
  • Capable of running on 115V or 240V power supply 

Cons

  • There is no foot pedal for TIG

2. Reboot Welder 

51VyH7fXphL. SL500

Reboot has been committed to developing and manufacturing professional welding equipment for a while now. The Reboot MIG210 welder is a high-end welding product that surpasses its competitors courtesy of the ingenuity that went into its production. Reboot consists of research and development, testing departments, and debugging, courtesy of a team of professionals. The company aims to give each one of its consumers the best experience possible when using its product.

Review

The Reboot RBM210D welder machine has a durable and great overall build. It features an IP21S-grade protective housing with durable components. The control and primary circuits are physically isolated to prevent the direct circuit’s disturbance and influence on the control circuit. Overall, the structure is drip and moisture-resistant and thus can adapt and work in harsh environments. Because Reboot is all about using the latest technology, they have the newest PWM tech and IGBT power module, which can alter the working frequency to medium, thus replacing the traditional transistor transformer with the medium frequency transformer.

The machine will work and is very useful for long hours courtesy of effective heat dissipation. Because it can be challenging to keep the machine running for long hours with high power output without overheating, the RBM210D adopted an intelligent fan that allows for the following:

  • Reduction in dust intake
  • Low noise
  • Quick heat dissipation
  • Saves you energy and protects the environment

It also features a 2T/4T mode; the 2T is usually an option when you want accuracy. It is perfect for electrical welding and when the welding time is typically short, but the results are more accurate. The 4T mode, on the other hand, holds its own when it comes to efficiency. It is perfect when you want to weld continuously for long hours. Using this mode helps reduce the burden you place on your fingers and dramatically improves your working efficiency. Digital intelligent control is also worth mentioning as one of the things we love about this welder. It helps avoid too much splatter and unattractive weld seams, among other issues.

One downside with this welder is in the instructions. The instructions lack content; thus, you may need to learn as you go. Other than that, it is an overall great piece of machinery. There is even a safety protection feature; the RBM210D has a voltage compensation device that keeps you going even when the power supply is insufficient.

Pros

  • Great quality build
  • Features digital intelligent control
  • Offers robust and reliable heat dissipation
  • Convenient safety protection 

Cons

  • Instructions seem to lack detailed content

3. Yeswelder Digital Welder

Yeswelder specializes in designing and manufacturing high-quality welding helmets, machines, and many other accessories that anyone with a passion for welding will enjoy. Most of their products are ideal for both home and industrial use. The manufacturer says they love what their customers do and want nothing more than to provide them with the quality tools they need to do their work. Their products are also well priced; Yeswelder wants you to retain more funds in your pocket so that you can fund your welding passion.  

Review

The Yeswelder MIG 205DS offers dual voltage (100v/220) and is capable of providing quality results despite its pricing. Operating is also relatively simple as it comes with an automatic synergy setting; thus, you don’t need high-level skills. The manufacturers are so confident about its performance and capabilities that when you purchase it, you get a 30-day return policy. The Yeswelder MIG205DS is a perfect tool for beginners; it can do basic metal welding or hobby projects. It also has a reasonable duty cycle, in addition to the fact that it offers 205 amps and a dual voltage machine.

If you are all about gasless welding, it can take 0.9mm flux core wire and 0.9mm MIG solid welding wire. One downside, however, is the warranty; the manufacturers offer a one-year warranty, while other brands in the same bracket offer at least three years. 

However, it is a great welder that comes with a metal wire feeder that only a few welders in this price range have. The build quality is fantastic and it will offer decent performance. 

Regarding portability, it is portable courtesy of the IGBT inverter technology. The Yeswelder MIG 205DS also has a safety feature to provide overloading protection, thus keeping the machine safe. You also get a smooth feed courtesy of the metal wire drive system.  

Pros

  • Great quality build
  • Portability courtesy of the IGBT inverter technology
  • Features an overload protection system
  • Smooth feed courtesy of the total metal wire drive system
  • Metal wire feeder is great to have at this price point

Cons

  • Short warranty compared to competitors

4. Hitbox HBM1200 Multifunctional Welder

51SEWe1cO3L. SL500

Hitbox has been in the welding game for more than 10 years now. The brand is well-established and they are known for its high-quality equipment in Europe, US, Asia, and Latin America. It should, therefore, not be a surprise that one of their welders made it on our list. The Hitbox HBM 1200 has excellent qualities and features that make it stand out. These include an impressive duty cycle and IGBT technology.

Review

The HBM1200 is ideal for stainless steel, iron, or carbon steel use. It is a 110/220V dual voltage MIG welder with a TIG function. The machine offers excellent welding characteristics and is relatively easy to operate. It comes with an easy-to-operate synergy panel, which automatically allows for changing the voltage. The synergy panel can also adjust the amperage and choose different thicknesses, thus making operation easy. In addition, it offers excellent results courtesy of its arc. There is also high-performance IGBT technology to finesse this welder.

You should, however, note that on the HBB1200, the MIG torch and earth clamp are undetachable. When you purchase it, you will find a welder and welding gun in the packaging, as well as an electrode holder, an earth clamp, a user’s manual, flux core wire, and an adapter. The HBM1200 comes with a one-year warranty. Setting it up might be challenging as the user manual can be hard to follow. However, the company offers 24-hour customer support if you need any help with the assembly. 

Longevity is another feature of this machine; it offers a 40% duty cycle at 120 amps; this means that your MIG 120 will protect you and your welder from any long-lasting damage. Although you may be irritated when the welder goes off all by itself, the upside is you know that it will last you a long time. In addition, there is also an overload safety protection feature that turns the welder off when it gets too hot or if the voltage and current go above their range. Finally, fans help cool off your welder when it gets too hot. 

Pros

  • Easy to control and operate
  • Long-lasting
  • Automatically turns off when the voltage is too high
  • Excellent welding characteristics
  • IGBT technology

Cons

  • Set-up instructions are not very clear

5. Simder Welder 

51IeUv8zrrL. SL500

Simder is a manufacturing company known for its professional welding machines and accessories. They offer MIG welders like this one, both gas and gasless, TIG welders, arc welder, plasma cutter, and other welding accessories. The Simder MIG welder is an improved version of its predecessor that’s more portable, lighter, and has better overall better quality.

Review

When you first unbox it, you will first notice that the fit and finish are good. Inside the box, you will find an electrode holder, a MIG torch, a ground clamp, and a 110V/220V adapter. The manual has pictures to show you where each component goes. However, there are no charts to guide you in setting the dials. 

It has an accessible start mode for beginners and you can alter the current and voltage automatically courtesy of the Synergic mode. Portability and efficiency in this tool are enhanced courtesy of the advanced IGBT and inverter. The Simder MIG 140M offers DC 110V/220V dual voltage. 

You will also be glad to know that this is a multi-application welder, which means you can do different things with it. It can weld iron, steel, carbon, and many other metals. You could use it for DIY projects, hobbies, and household welding. The flux core welding, however, could use improvement as it could be better than the other welders on this list. If a clean, strong weld is what you want to go for, you would be better off skipping this one. The cords are also shorter than you would expect.

However, other than that, it is an outstanding piece of equipment. It is nice and compact, has several convenient features, and is used to complete tasks quickly and efficiently. In addition, customer care support is reliable; they are open to listening to their customers and responding to their queries, so you won’t get stranded if you purchase it and there’s a problem.      

Pros

  • Beginners can efficiently operate it
  • Suitable for a majority of the jobs you throw at it
  • Great customer service
  • Lightweight
  • Great value for your money

Cons

  • Cables could be longer

Conclusion

Using the right welder can help get the job done right. From our list, the Weldpro MIG200GD is our overall best, as it stands out in almost every aspect. It is durable, lightweight, high-quality, and offers excellent results. If you are going to work for long hours, the Reboot MIG210 is your match because it has powerful heat dissipation.

The Yeswelder MIG 205DS offers just as good results at a lower price. For longevity and impressive durability, go for the Hitbox HBM1200.   Finally, the Simder MIG-140M Welder is great for several applications.

Leave a Comment

Your email address will not be published.

Special offer for our visitors

Get your Welding Free Guide

We will never send you spam. By signing up for this you agree with our privacy policy and to receive regular updates via email in regards to industry news and promotions